Grove - CO2 & Temperature & Humidity Sensor - SCD41
The Grove - CO2 & Temperature & Humidity Sensor - SCD41 is a small but powerful module made by Sensirion. It is a multiple function sensor that can measure temperature, humidity, and CO2 at the same time. It is based on the SCD41 module and you can use this sensor in your GPS, IoT devices, or other devices which need those four parameters.
- 10+: $43.50
- 3-in-1 for multiple measurements
- low power consumption
- Arduino/Raspberry Pi/Micro: bit Code available
- Wide measurement range from 400 to 5,000 ppm
- Wide power supply range, from 2.4v to 5.5v
- Easy project operation: Digital interface I2C, Breadboard-friendly, Grove compatible
- Best performance-to-price ratio
Get Started with Industrial Sensors
SenseCAP S210x series industrial sensors provide an out-of-box experience for environmental sensing. Please refer to the S2103 Wireless CO2, Temperature, and Humidity Sensor with higher performance and robustness for air quality monitoring.
Plant Environmental Monitoring System
Arduino weather station
Upgrade to Industrial Solutions
With the SenseCAP S2110 Grove converter and S2100 data logger, you can easily turn the Grove into a LoRaWAN® sensor. Seeed not only helps you with prototyping but also offers you the possibility to expand your project with the SenseCAP series of robust industrial sensors.
The IP66 housing, Bluetooth configuration, compatibility with the global LoRaWAN® network, built-in 19 Ah battery, and powerful support from APP make the SenseCAP S210x the best choice for industrial applications. The series includes sensors for soil moisture, air temperature and humidity, light intensity, CO2, EC, and an 8-in-1 weather station. Try the latest SenseCAP S210x for your next successful industrial project.
|Input voltage||3.3V / 5V|
|Operating range||-10~+60℃; 0-100% r.H.; 400-5,000 ppm|
Compare with SCD30
|Module No.||Precision||Range||Low Power Trigger||Size|
± 30ppm +3%
|400 - 10,000ppm||×||35 × 23 × 14 mm|
|SCD41||± 40ppm +5%||400 - 5,000ppm||√||10.1 × 10.1 × 13 mm|
What is PASens® Technology?
PASens® Technology is based on the photoacoustic sensing principle. The photoacoustic sensing principle allows extreme miniaturization of the CO2 sensor without compromising sensor performance due to the fact that the sensor sensitivity is independent of the optical cavity size. The reduced size and the smaller number of integrated components result in a highly price-efficient BOM structure. Thanks to the miniaturizing and the economical BOM structure of these new CO2 sensors, the SCD4x will open up numerous possibilities for a whole new set of products and applications.
Click here to learn more about the measurement principle and key features of PASens® Technology.